Magnus 148

Available in5 L25 L

Common uses

• ▸Stains and truck interiors
• ▸Aircraft cleaning
• ▸Transport bodywork

Product use

M AGNUS 148 is used for the cleaning of fuselage, wing surfaces, tail assemblies and other exterior surfaces of an aircraft. It is also used for degreasing of engine cawlings, nacelles, flap wells and removing exhaust stains from the aircraft. M AGNUS 148 can also be used for cleaning interior surfaces of an aircraft. May be effectively used as an exterior surface cleaner for transport vehicles etc.

Directions for use

M AGNUS 148 can be applied by means of spray, brush, pressure gun, steam cleaning and Mobile Scrubbing Equipment. Steam cleaning solution: A 1: 20 dilution of M AGNUS 148 makes an excellent steam-cleaning and pressure-gun solution. Concentrations: For cleaning fuselages, wing surfaces, tail assemblies and other exterior surfaces of aircraft and transport equipment: Apply M AGNUS 148 diluted 1: 3 or 1: 5 with water to exterior aircraft surfaces by means of spray or brush. Let stand for a few minutes, then brush with long-handled, soft-bristle to loosen stains and deposit. Pressure rinse with water (preferably with warm water). For degreasing of engine cowlings, nacelles, flap and wheel wells: Use undiluted or diluted 1: 2 with water. Apply solution by spray or brush to heavily soiled areas. After application use a soft-bristle brush to loosen stains, soot and grease deposits. Then, pressure rinse with water, preferably high pressure, and warm water. Mix one part M AGNUS 148 using air or mechanical agitation. Apply with spray or brush to the surface to be cleaned. Let stand a few minutes, and then brush with a soft-bri