Magnus 755

Available in25 L200 L

Common uses

• ▸Multi-metal decarbonising baths
• ▸Paint stripping mixed assemblies

Product use

M AGNUS 755 is used as an immersion tank decarboniser, paint stripper and heavy-duty degreaser for injectors, engine blocks, cylinder heads, pistons, oil pumps, coolers, oil filters etc..

Directions for use

M AGNUS 755 is used as received with the addition of a 10–15 % waterseal. A minimum depth of 8 mm for the waterseal is required. The tank temperature should be between 60–65°Celsius. The pH of the seal should be between 10.5–11.2 for metal protection. To keep the pH of the seal in these parameters, an addition of 1 kg Caustic potash and 600 grams of Sodium dichromate per 1000 litre M AGNUS 755 is made to the waterseal. Parts are immersed completely in the lower layer for a minimum of 20 minutes up to 180 minutes depending on the nature of the soil to be removed. Withdraw parts slowly through the waterseal to displace the solvent. Wash parts with a powerful water jet to r emove loosened carbon and paint. It is advisable to pre-clean heavy grease deposits before immersion the parts in M AGNUS 755. This ensures an extended tank life. Light degreasing: Use 1 part of M AGNUS 755 with 5 parts of thinners, this will act as a suitable light degreaser. Rubber removing: Use 1 part of M AGNUS 755 with 5 parts of water and apply to concrete. A mixture of 25 litres will cover 6 square mete r s of floor area. Ref. No. 0 1 / 2 4